|
Product information: page 1 (172 kB, jpg), page 2 (200 kB, jpg).
click to enlarge | Top Light Turbo curing light | Fast LED curing light.
cold light, never heats up, no fan
fast, ramp & pulse mode
small, light, compacteasy to built in unit chair
long use-life LED
price: call! |
Top Light - Ergonomic and powerful LED curing light.
 |
exhibition reward |
KEY BENEFITS
This Light Emitting Diode curing light, has the power equal to a 1200mw/cm2 halogen light. The Top Light cures 3mm of Spectrum in 5 seconds on F setting. This semiconductor optical device has an array of blue light emitting diodes set to 430~490 nm.
The Top Light is quiet in operation and should not need a new bulb.
The Top Light controls are easy to use.
The Top Light has many advanced features.
The Top Light twill also self test if the M button is held whilst the power is turned on.
The Top Light retains the last mode used when powered up again.
If you do not use Top Light for 3 minutes, the light will power down. Any button will wake up the light ready for use.
The Top Light display can be set easily for right or left hand usage.
LED CURING LIGHTS
The blue light produced is a very narrow band width which corresponds closely to the peak light absorption of the photo initiator camphorquinone found in most light activated materials. As the light generated is blue light rather than filtered white light, the light is much more efficient than halogen curing units. The Top Light unit is smaller than halogen curing lights as there is no large bulb or fan (to keep the bulb cool).
EASY TO USE
The Top Light controls are easy to use. M switches the unit between operating modes. S adjusts the cure time on a pre calibrated scale of 5, 10, 20, 30, 40, 60 and 99 seconds. O is the on / off switch.
THE QUIET TOP LIGHT SHOULD NOT NEED A NEW BULB!
The Top Light is quiet in operation, and even after extended use, the end of the light guide will never heat up. The diodes should not have to be changed during the expected working life of the light. Their life is on average the equivalent of 4 years continuous use.
LAST OPERATION MEMORY
Top Light will retain the last mode used when powered up again.
POWER SAVING
If you do not use Top Light for 3 minutes, the light will power down. Any button will wake up the light ready for use.
RIGHT OR LEFT HAND USAGE
If the S mode button is held as the unit is powered on, the display will invert. Thus left handed dentists can have the display the correct way up.
ADVANCED FEATURES
Top Light unit has three operating modes F, R and P, Fast, Ramp, and Pulse. F mode starts the unit on full power for the duration of the cure time set. R mode gradually ramps the power up to full over 2 seconds, and then continues at full power for the remainder of the cure time set. P pulses the light at full power for a second with a rest of 0.2 seconds for the duration of the cure time set.
WARRANTY
3 years on the unit with the exception of the light guide and cure tips. The warranty on the light guide and cure tips is limited to 1 month from date of purchase.
ACCESORIES:
1. Table holder: 1pc
2. Light guide: 1 pc
3. Cure shield: 1 pc
4. Power adapter: 1 pc
TECHNICAL SPECIFICATION:
| Light source: | Hi-Flux 5W LED |
| Light power: | equal to halogen 1200mw/cm2 |
| Wave length: | 430-490 nm |
| Light guide: | 8 mm angled optic fiber |
| Dimensions: | D28 x L222 (mm) |
| Weight: | 94.5g |
| Adapter - input: | AC 100V - 240V, 0.3A |
| Adapter - output: | DC 5V, 2A |
| Adapter - frequency: | 50/60Hz |
QUESTIONS, OPINIONS, ORDERS
To ask a question, express your opinion or to send an order, please contact us.
You can also check delivery and payment options.
|
led curing lights
